AR-10 Zero™ Trigger – Hybrid

The AR-10 compatible Zero hybrid trigger features a powerful 17-7 stainless steel hammer spring and heavy S7 hammer. This change ensures increased reliability across multiple variations of .308 and 7.62×51 NATO cartridges available.

The short 2mm reset makes the Zero trigger one of the fastest on the market. The reset is also positive, which facilitates even faster shooting during training or competition. The trigger, hammer, and disconnector are EDM cut and then polished with brass wire to a micron finish in all critical contact areas for a friction-less engagement. The pull-weight and disconnector set screws are also welded after loctite for safety and a lifetime of use.

Zero™ AR-10 triggers are available in a pull weight of 4.0 lbs and Black Nitride finish. Black Nitride is a heat treatment process that enhances corrosion resistance, improves lubricity, and leaves a fine black finish on the surface of the metal.

In short, all of the features of the Zero™ trigger hybrid are designed to offer a shooting experience that is exceptionally smooth, crisp, and fast.

* ANTI-WALK TRIGGER PINS ARE NOW INCLUDED

* 0.1540 inch diameter trigger pins are required. Undersized and out-of-spec trigger pins will cause the trigger to malfunction.

* Primary tension screw: Tighten to 8in-lbs (no Loctite)

* Secondary tension screws: Tighten to 14in-lbs (add blue Loctite)

Read Will P’s review at The Firearm Blog.